Categories
Contact Us

Address: No.1 Dongsan RD, Xinlian Industrial Area, Lishui Town, Nanhai District, Foshan City, Guangdong Province, China
Mob: +86-13826111091
Tel: +86-757-85619957
Fax: +86-757-85619955

Email: hyh5@china-hyh.com


Knowledge
Home > Knowledge > Content
Exterior Door Handle
Oct 09, 2018

Exterior Door Handle

主图1-2.jpg

Handle door lock removal method

The handle of the door lock is a door handle, the manufacturing process is relatively simple, the 

cost is low, and the handle door lock is a type of lock that is relatively easy to disassemble in the 

eyes of the expert. Then it is not difficult for ordinary people to dismantle the door locks. As long 

as you have a screwdriver, add the correct steps. Then how to remove the handle lock?

How to remove the handle lock?

1. First use a Phillips screwdriver to remove the screws seen from the top and bottom of the door;

2. Then take off the panel handle, if you change the lock core, then remove the two screws of the 

lock sleeve, and then take off the lock sleeve;

3. Then remove the lock cylinder fixing screw on the side lock body (that is, the side of the bolt), 

and then pull out the lock cylinder. If you encounter a tight lock cylinder, you can use a screwdriver 

to gently tap the end of the lock cylinder to extract the lock cylinder.

4. Summarize the removal method of the handle door lock: first remove the handle, then remove 

the lock core, and then remove the lock body. Remove the panel where you can't see the screw. 

Remove the screws that can be seen from the back, then remove the lock cylinder and turn the lock 

tongue back to open it.

5. In some cases, due to the gravity of the door leaf, or the cause of the door leaf, the door leaf 

sinks, and the door lock or door opening is not smooth. At this time, it is often difficult to open the 

door with a key and lock the door. At this time, do not forcibly twist the key, so as not to break the 

key and increase trouble.

6. The correct solution: you should first check the reason. If the door leaf sinks due to loose leaf, 

the loose leaf should be fastened with screws. If the door frame is deformed or its cause is 

unrecoverable, start with the door frame and expand the lock tongue accordingly, so that the door 

lock switch door can resume normal and smooth.

7. The handle lock is the handle lock that is often said, so the disassembly method is basically the 

same. Although many people can't quickly remove the door lock when disassembling the door lock 

for the first time, the parts of the door lock are slowly removed, and the door lock will eventually 

be completely removed. Be more patient.


  • Newsletter
  • Categories
  • Contact Us

    Address: No.1 Dongsan RD, Xinlian Industrial Area, Lishui Town, Nanhai District, Foshan City, Guangdong Province, China
    Mob: +86-13826111091
    Tel: +86-757-85619957
    Fax: +86-757-85619955

    Email: hyh5@china-hyh.com


  • QR Code
  • Copyright © Guangdong HYH Hardware Industrial Co.,Ltd All Rights Reserved.